S.E. International Inspector Xtreme USB Spécifications télécharger pdf (Page 15)

Observer USB Chart Screen

The Observer USB Chart Screen displays a chart

of the data currently collected by the aached

instrument.

The X Axis

The X axis consists of the me and date stamp of

the reading collected and will adjust automacally

to display all of the data collected unless the Scroll

checkbox is selected. If the Scroll checkbox is

selected, the X axis will display the latest readings collected in the minute(s) me frame selected next to the

Scroll checkbox. For example, if 2 minutes is selected in the Scroll me, then the chart will display the latest 2

minutes of data collected.

The Y Axis

The Y axis displays the unit of measurement for the reading displayed and will automacally adjust to display

the highest reading collected.

Observer USB Meter Screen

The Observer USB Meter Screen simulates an analog meter to display the readings colected by the detector.

Enable Alarm

This will enable the alarm that is built into the soware. Once the radiaon levels go back below the set level

of the alarm, the alarm will stop unless you have the “Latch Alarm” checkbox selected.

Latch Alarm

When the latch alarm is checked, the alarm will connue to go

o unl the reset buon is pressed.

Auto Range

When the Auto Range checkbox is selected, the analog meter

will automacally adjust the scale to a higher range if the reading

exceeds the Scale Max.

Scale Max

The Scale Max labels the highest reading on the scale for the

range being displayed.

Zero

When the Zero is clicked, the averaging of the collected counts starts over.

Units

The Units dropdown box selects the unit of measurement displayed on the analog meter.

Averaging Time

The Averaging Time selects the amount of me in which the previous readings are averaged for a more

accurate display of the collected counts.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 28 29

Pas de commentaire

S.E. International Inspector Xtreme USB Spécifications Page 15